The stability of small excavator is more important in the operation, not only can the construction be safe, but also the construction efficiency will be significantly improved, and the drawing operation can also extend the life of the machine.

Place the main clutch rod of the small excavator in the "neutral" position and start the engine. Check the instrument panel, drivetrain organization, working equipment and brake system organization to see if everything is in order and verify their accuracy before starting work.

After the small excavator engine starts, it is forbidden to stand on the arm, bucket, track and shed. When working in mud, the movement must be gentle to prevent the machine from shaking violently, which will move down quickly. You can use your arms to pull the car away, support the car slightly, and then immediately get into the arm to avoid crushing the hard shell on top of the mud shell.

When we dig some small slopes, we should keep the digging point close to the machine for efficient and rapid digging. If the digging point is too far away, the center of gravity will be unstable and cause the excavator to tilt up.